can't connect to this network

Can’t Connect to this Network: Solved with [10 Best Solutions]

Summary

Learn how to fix this issue “can’t connect to this network” Wi-Fi error on Windows 10/11. Wi-Fi network may not connect due to different reasons. If you have tried multiple times and still have the same issue. here are 10 possible solutions to fix the issue on Windows.

How to fix can’t connect to this network WiFi?

This is a common problem in windows nowadays. If you are unable to connect to the internet due to ‘Can’t connect to this network’ Error in Windows 10 or 11. Here are 10 ultimate solutions explained below step by step to fix this problem on your computer.

can't connect to this network
You may also read How to speed up your windows.

Posible reasons can cause this issue: can’t connect to this network

There could be many possible reasons, we listed below the possible reasons responsible for this error and will learn the methods using which you can fix such an error or internet issues.

  • Wrong Wi-Fi information such as password, SSID, etc.
  • Your PC is unable to obtain IP address
  • DNS issue
  • Network adapter driver issue
  • The Wi-Fi password got changed
You may also read: Best tips to speed up chrome

Ways to fix can’t connection to this network issue:

There might be numerous ways to fix this common issue in windows 8, 10 and 11. but according to case study we have done the following are the best fixes to solve this issue:

Why is my computer saying can't connect to this network?

Method 1: Forget the network and Re-connect

You might face an issue in your PC and sometime by just restarting your PC, hopefully the issue gets solved. The same can be done with this issue as well by forgetting the network and reconnecting. here are, how you can do it on windows 11:

  1. Click on> Wi-Fi button on Taskbar
  2. Right Click on > Target Wi-Fi name > Forget

🗒 Note: alternative way:

  1. Press Winkey click on Setting
  2. Click on Network & Internet > Wi-Fi > Manage Known Network
  3. On the right side, Click Forget on targeted Wi-Fi
forget network

Method 2: Run Network Troubleshooter

If you tried the above fix, but still, you have internet connection problems. There are other ways to troubleshoot. Find the exact error and let the windows itself solve it:

  1. Open Setting or Press Winkey + I
  2. Click on > System > Troubleshoot > Other Troubleshooters
  3. Select internet Connection and click on > Run
Run Network Troubleshooter

Method 3: Flush DNS cache

Sometimes your PC is connected to the internet, but it doesn’t have internet access due to DNS (Domain Name Controller) error such ‘DNS Server isn’t responding’. The windows and the browser always keep a copy of the DNS lookups to quickly resolve the query and get the webpage’s corresponding IP address when requested. So, flush the local DNS cache and fix network error in windows.

  1. Open CMD by pressing Winkey + R and type CMD
  2. Type ipconfig /flushdns
  3. Type ipconfig /registerdns
flush dns

Note: You can view local DNS cache by: Typing ipconfig /displaydns

Method 4: Reset IP Address and disable IP v6

(1) Resetting or renewing IP address

Sometimes windows can’t connect to this network issue, it is because your PC is not obtaining IP address due to many reasons such as auto obtaining IP address is enabled or network gateway IP address has changed.

  1. Open CMD by pressing Winkey + R and type CMD  
  2. Type ipconfig /release
  3. Type ipconfig /renew

(2) disable IP v6

  1. Open Run by pressing Winkey + R and type CMD  
  2. Type ncpa.cpl
  3. right click Wi-Fi and select Properties from the drop-down menu
disable IP v6

4. Then, uncheck the Internet Protocol Version 6 (TCP/IPv6) option and select OK to save the change.

disable ip v6

Method 5: Resetting Network setting

The Network reset might be able to assist you in re-establishing an internet connection. It removes all existing Network profiles for all the connected networks. This will restart your PC using the factory default settings. Follow the below steps if you think How do I reset my network?

  1. Open Setting or Press Winkey + I
  2. Click on > Network & Internet > Advance Network Setting > Network Reset
  3. Click on > Restart
network reset

Method 6: Enable and Disable Airplane mode and NIC

(1) Enable and Disable Airplane mode

In some case just by turning airplane mode on and off, you can reset the Wi-Fi network, allowing you to connect to network successfully. Click the Wi-Fi icon in the system tray at the bottom right. Click on Airplane mode, wait for a moment, and then click it again to turn it off:

Enable and Disable Airplane mode

(2) Enable and disable Wi-Fi adapter

If the turning on and off airplane doesn’t work, you face wifi can’t connect to this network issue, then try to reset Wi-Fi network setting by Disable and Enable the Wi-Fi adapter:

  1. Open Run or Type Winkey + R
  2. Type ncpa.cpl
  3. Right Click on > Wi-Fi Adapter> Disable or Enable
enable and disable Wi-Fi adapter

Method 7: Fix Network Driver

This issue can’t connect to this network hotspot can be solved by uninstalling the network driver and re-installing again. here how you can do it:

  1. Open Run or Press Winkey + R
  2. Type devmgmt.msc
  3. Right Click on > Your Wireless adapter > Uninstall device or Install device
Fix Network Driver

Method 8: Change Wireless Adapter Mode

If you still can’t connect to internet or showing windows cant connect to this network error. So, Windows allows you to customize the network adapter mode, which means you can try enabling the 802.11 standard feature in order to fix the network error. You may need to change wireless network adapter mode in case incompatibility between your device and Wi-Fi network. here how you can do it:

  1. Open Run or Type Winkey + R
  2. Type ncpa.cpl
  3. Right Click on > Wi-Fi Adapter> Properties
  4. Select “Client for Microsoft Network” then Click on Configure
  5. Click on Advance Tape
  6. Select “802.11…” under Properties
  7. Select “Dual Band 802.11a/b/g” under Value (Note: This Might different in your PC)
Change Wireless Adapter Mode

Method 9: Winsock Reset

If the above solutions didn’t work. So, try to restore the default Windows Sockets API settings, as resetting your Winsock library can help you resolve any issues, which is not allowing everything to work smoothly. Perform the Winsock reset as follows:

  1. Open Run or Type CMD
  2. Type in CMD netsh winsock reset
winsock reset

Method 10: Fix Security Type Mismatches

In some case the security type mismatch between Wi-Fi router and your device Wi-Fi adapter can cause connection failure. You need to be configured both sides on the same type security to work smoothly. Here, how to check and change your PC Wi-Fi adapter security type:

  1. Open Run or Type Winkey + R
  2. Type ncpa.cpl
  3. Double Click on > Wi-Fi Adapter
  4. Click on >Wirless Properties
  5. Click on >Security Tape
  6. Select the security type that match your Wi-Fi router security type.
fix security type mismatches

Conclusion

We hope you were able to resolve the “can’t connect to this network windows 11” or “can’t connect to this network windows 10” issue by using the above solutions in this article. If not, please contact us and let us know what you want assistance with in the comment. Our team of experts is available to assist you.

Follow our Blog for more great articles like this one! You can best free SEO tools to improve your website. Moreover, you can sign up for our newsletter. Thank you for reading! We hope to see you again soon.

FAQ

Why is my computer saying can’t connect to this network?

This issue is due to one of these reasons password changes, unable to obtain IP address or other issues explained in this article with comprehensive solutions.

How do I fix failed to connect to the network error?

Here, how you can fix this issue by enabling and disabling the network adapter or go through this article for more solutions

Check out more about financial literacy.

Share This Post and Help Others

Similar Posts

3 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *